Oscilloscope HAMEG 407-2

Oscilloscope HAMEG 407-2 adalah Sebuah Alat Ukur yang menampilkan sinyal tegangan terhadap frekuensi.Oscilloscope ini adalah oscilloscope digital. Berikut ini spesifikasinya

Gambar Oscilloscope HAMEG 407-2

Spesifikasi:

A.    Vertical Deflection

-          Operating modes: Channel I or CH II separate, Channel I and II: alternate or chopped (Chopper Frequency approx. 0.5MHz)

-          Sum or Difference from Channel I and ± Ch. II,

-          XY-Mode: via CH I (X) and CH II (Y).

-          Frequency range: 2x DC to 40MHz (−3dB). Risetime: <8.75ns. Overshoot: ≤1%.

-          Deflection coefficient: 14 calibrated positions variable 2.5:1 to min. 50V/div.

-          1mV/div and 2mV/div: ±5% (0 to 10MHz (-3dB))

-          5mV/div to 20V/div: ±3% (1-2-5sequence).

-          Input impedance: 1MΩ II 18pF. Input coupling: DC - AC - GD (Ground) Input voltage: max. 400V (DC + peak AC).

B.     Triggering

-          Automatic(peak to peak): ≤ 20Hz-100MHz(≤0.5div), Normal: DC-100MHz, LED for trigger indication.

-          Slope: positive or negative.

-          Sources: CH I or II, line, ext. CH I alternate CH II (≤ 0.8div.)

-          Coupling: AC (≥10Hz -100MHz), DC (0-100MHz), HF (50kHz - 100MHz), LF (0 - ≤1.5kHz).

-          Triggering ext.: ≥0.3Vpp from DC to 100MHz

-          Active TV-Sync-Separator (field& line, pos, neg.)

-          2nd triggering (Del. Trig.): normal with level control DC to 100 MHz.

C.     Horizontal Deflection

-          Time coefficients: 1-2-5 sequence, Accuracy ±3%

-          Analog: 22 cal. positions  from 0.5s - 50ns/div.

-          Digital: 27 cal. positions from 100s - 0,2µs/div. Variable (analog) 2.5:1 up to 1.25s/div.

-          X-MAG. x10: analog to 10ns/div., dig. to 20ns/div±5%.

-          Delay: 120ms - 200ns, variable,

-          Hold-off time (analog): variable to approx. 10:1.

-          Bandwidth X-amplifier (analog): 0-3MHz (−3dB). Input X-amplifier via Channel II, Sensitivity see Channel II.

-          X-Y-phase shift : <3° below 120kHz.

D.    Digital Storage

-          Operating modes: Refresh, Roll, Single, XY, Envelope, Average (2 to 512 waveforms).

-          Automatic Dot Join function

-          Sample Rate: max. 100MS/s  (8 bit)

-          Refresh rate: max. 180/s

-          Record length: 2048 x 8 bit per channel.

-          Reference memory Reference memory Reference memory Reference memory Reference memory: 2 x 2k x 8bit (EEPROM).

-          Resolution: Y: 25 points/div, X: 200 points/div.

-          Pre-/Posttrigger: 25, 50, 75, 100, -25, -50, -75%.

E.     Operation / Control

-          Manual (front panel switches);

-          Auto Set (automatic parameter selection).

-          Save/Recall of 9 user-defined parameter settings

-          RS232 interface for remote control via a PC. Remote control (Option) HZ68.

-          Multifunction- Interface HO79-6(Option): RS232, IEEE-488, Centronics (Postscript, HPGL, PCL, EPSON).

-          Readout: Display of parameter settings.

-          Cursor measurement of ∆V, ∆t or ∆1/t (frequency), separate or in tracking mode.

F.      Component Tester

-          Test voltage: approx. 7Vrms  (open circuit).

-          Test current: max. 7mArms (short circuit).

-          Test frequency: approx.50Hz One test lead is grounded (Safety Earth).

G.    General Information

-          CRT: D14-364GY/123 or ER151-GH/-,rectangular screen (8x10cm) internal graticule

-          Acceleration voltage: approx 2000V

-          Trace rotation: adjustable on front panel

-          Calibrator: square-wave generator (tr <4ns) ≈1kHz/1MHz; Output: 0.2V ±1%.

-          Analog Intensitymodulation, max. +5V (TTL). Line voltage: 100-240V AC ±10%, 50/60Hz

-          Power consumption: approx. 42 Watt at 50Hz. Min./Max. ambient temperature: 0°C...+40°C

-          Protective system: Safety class I (IEC1010-1) Weight: approx. 6.0kg, color: techno-brown Cabinet: W 285, H 125, D 380 mm